Packages

cypress

16.3.0 · 10 Nov 2026MIT7.6M / weekRepositoryHomepagenpmAtom feed

Upgrading cypress From 15.8.0 to 15.21.2

22 releases in betweennotes for 10

Reading releases, release notes and advisories…

Other targets from 15.8.0Latest16.3.0
  1. 15.8.0yours
  2. 3 releases
  3. 15.10.0security
  4. 15.11.0security
  5. 15.12.0security
  6. 15.13.0security
  7. 1 release
  8. 15.14.0security
  9. 2 releases
  10. 15.15.0security
  11. 15.16.0security
  12. 1 release
  13. 15.18.0security
  14. 6 releases
  15. 15.21.2target
4+
changes to make
0
advisories fixed
10+
new
67+
fixes

Counted from 10 of 22 release notes. Advisories are counted from the advisory database, in full.

Start here

Before you upgrade

Tick each one off as you go
  • Deprecated15.21.0
  • Deprecated15.17.0
  • Deprecated15.15.0
  • Deprecated15.10.0

Security

  • Upgraded undici from 6.26.0 to 6.27.0 to address a CRLF Injection vulnerability reported in security scans. Addressed in #34121.

    15.18.0
  • Upgraded esbuild to ^0.28.0 to address CVE-2025-68121 in the bundled esbuild Go binary (incorrect TLS certificate validation during session resumption), as reported in container and image security scans. Fixes #33599. Addressed in #33816.

    15.16.0
  • Upgraded socket.io from 4.0.1 to 4.8.3, socket.io-client from 4.0.1 to 4.8.3, and socket.io-parser from 4.0.5 to 4.2.6 to address a Denial of Service vulnerability reported in security scans. The engine.io, engine.io-client, and engine.io-parser direct deps in @packages/socket were also bumped to keep transitive copies aligned and the existing browser-side patches applied. Addressed in #33719.

    15.15.0
  • Upgraded uuid from 8.3.2 to 11.1.1 to address an Improper Validation of Specified Index, Position, or Offset in Input vulnerability reported in security scans. Addressed in #33765.

    15.15.0
  • Upgraded axios to 1.15.0 to address CVE-2025-62718 and CVE-2026-40175 vulnerabilities reported in security scans. Fixes #33590.

    15.14.0
  • Upgraded simple-git from 3.27.0 to 3.32.3 to address Improper Handling of Case Sensitivity (CVE-2026-28292) vulnerability reported in security scans. Addressed in #33470.

    15.13.0
  • Upgraded minimatch to 3.1.3 to address CVE-2026-26996, CVE-2026-27903, and CVE-2026-27904 ReDoS vulnerabilities reported in security scans. Addressed in #33461.

    15.13.0
  • Upgraded flatted from 3.2.9 to 3.4.2 to address Prototype Pollution (CVE-2026-33228) vulnerability reported in security scans. Addressed in #33501.

    15.13.0
  • Upgraded basic-ftp to 5.2.0 to address CVE-2026-27699 vulnerability reported in security scans. Addresses #33436.

    15.12.0
  • Upgraded fast-xml-parser to 4.5.4 to address CVE-2026-25896 vulnerability reported in security scans. Addresses #33434.

    15.12.0

Release by release

  1. 15.21.1 – 15.21.22 releases, no release note

  2. 15.21.0

    Deprecation18 Aug 20261 new · 6 fixes
    • Deprecated

      cy.exec() has been deprecated and will be removed in a future major release of Cypress. Use cy.task() instead, which runs in Node without depending on the operating system, shell, or terminal of the machine running Cypress. The execTimeout configuration option is deprecated alongside it, in favor of taskTimeout. Addresses #34639.

    • New

      Added a CYPRESS_DISABLE_GUEST_TELEMETRY environment variable, which disables any reporting Cypress sends for non-logged sessions. This includes anonymous usage events within Cypress open-mode and the Cypress CLI. Addressed in #34540.

    • Fixed

      Fixed an issue where WebKit runs could hang indefinitely when more parallel requests than the browser's per-host connection pool were intercepted by a cy.intercept() route with a request handler. Fixes #33926 and addresses #23807.

    • Fixed

      Fixed an issue where overriding blockHosts with test configuration (for example describe('...', { blockHosts: [...] }, ...)) had no effect, so requests were still blocked or allowed according to the project-level value. Test-level blockHosts overrides now take effect at runtime and are restored between specs. Fixes #21151.

  3. 15.18.1 – 15.20.14 releases, no release note

  4. 15.18.0

    Security fix23 Jun 20261 new · 13 fixes
    • Security

      Upgraded undici from 6.26.0 to 6.27.0 to address a CRLF Injection vulnerability reported in security scans. Addressed in #34121.

    • New

      Added a removeSRIAttributes configuration option. When enabled, Cypress strips the integrity attribute from <script> and <link> elements on first-party resources so they are not blocked by Subresource Integrity (SRI) enforcement after Cypress rewrites them. The option covers integrity set via static HTML, a JavaScript string literal, and runtime DOM assignment (including the webpack-subresource-integrity pattern used for lazily-loaded chunks). Addresses #34124 and #18315.

    • Fixed

      Fixed an issue where an application that repeatedly threw the same uncaught exception (for example, a benign ResizeObserver loop ... notification fired on every animation frame) could exhaust renderer memory and crash the browser. Consecutive identical uncaught exceptions within a test now collapse into a single, updating command-log entry, and a handled (suppressed) uncaught exception no longer captures a DOM snapshot. Addresses #27415.

    • Fixed

      Fixed an issue where calling req.destroy() or using { forceNetworkError: true } inside a cy.intercept() handler in experimental WebKit caused infinite request loops. Fixes #23810. Fixed in #33948.

  5. 15.17.0

    Deprecation9 Jun 20261 new · 23 fixes
    • Deprecated

      Upgraded tsx from 4.20.6 to 4.22.4. The esbuild Go binary bundled with tsx no longer reports CVE-2025-68121 in security scans, and loading TypeScript config files no longer emits the Node.js [DEP0205] module.register() is deprecated warning. Fixes #33954 and #33744.

    • New

      Added Bun as a recognized package manager. The cypress npm package can now be installed and invoked with Bun (for example bun run cypress open or bun run cypress run). Addresses #28962. Addressed in #32580.

    • Fixed

      Fixed a memory leak where runs with screenshotOnRunFailure enabled slowed down progressively, as each failure screenshot was retained in memory for the rest of the run. Fixes #33516.

    • Fixed

      Fixed an issue where, in the Electron browser, navigating away from a page whose beforeunload handler requested a confirmation prompt (for example window.onbeforeunload = () => 'message' or a beforeunload listener that sets event.returnValue) would hang and eventually fail the command with a page load timeout. Such navigations — including cy.visit(), cy.reload(), and clicking links — now proceed automatically without the confirmation prompt blocking the test, matching the behavior in Chrome. Fixes #2118.

  6. 15.16.0

    Security fix26 May 20268 fixes
    • Security

      Upgraded esbuild to ^0.28.0 to address CVE-2025-68121 in the bundled esbuild Go binary (incorrect TLS certificate validation during session resumption), as reported in container and image security scans. Fixes #33599. Addressed in #33816.

    • Fixed

      Fixed an issue on Node 24.16.0+ and Node 26.1.0+ where installing Cypress could silently extract only the first file from the binary archive, causing the test runner to fail to launch with a "Cypress binary is missing" error. Addresses #33891. Addressed in #33887.

    • Fixed

      Fixed a regression in 15.14.2 where the cypress install and cypress verify task list output could render one character per line in CI environments that allocate a pseudo-TTY without setting COLUMNS. Fixed in #33890.

    • Fixed

      Fixed an issue where Cypress would abort the process and show a crash dialog when it received a SIGINT. Fixes #29228. Fixed in #33542.

  7. 15.15.0

    Security fix12 May 20268 fixes
    • Security

      Upgraded socket.io from 4.0.1 to 4.8.3, socket.io-client from 4.0.1 to 4.8.3, and socket.io-parser from 4.0.5 to 4.2.6 to address a Denial of Service vulnerability reported in security scans. The engine.io, engine.io-client, and engine.io-parser direct deps in @packages/socket were also bumped to keep transitive copies aligned and the existing browser-side patches applied. Addressed in #33719.

    • Security

      Upgraded uuid from 8.3.2 to 11.1.1 to address an Improper Validation of Specified Index, Position, or Offset in Input vulnerability reported in security scans. Addressed in #33765.

    • Deprecated

      The cy.end() command has been deprecated and will be removed in a future release. Instead of using .end() to break a chain, start a new chain of commands off of cy. Addressed in #33707.

    • Fixed

      Fixed an issue where the proxy stripped Content-Length: 0 from empty responses (e.g. a DELETE 200 with no body) and the resulting empty body was re-emitted with Transfer-Encoding: chunked, breaking clients that assume a fixed-length response. Partially addresses #16469. Fixed in #33754.

  8. 15.14.1 – 15.14.22 releases, no release note

28 other lines we could not sort, mostly version bumps
  • Upgraded @sinonjs/fake-timers from 11.3.1 to 14.0.0. While cy.clock() is active, the faked performance object now implements performance.mark() and performance.measure() (previously no-ops that returned undefined) and reports a faked performance.timeOrigin. Addressed in #34377.

    15.21.0
  • Running cypress install when Cypress is installed globally no longer prints a warning recommending that Cypress be installed as a per-project devDependency. Addresses #34134.

    15.18.0
  • Running Cypress with process profiler debug logs enabled (for example DEBUG=cypress*process_profiler) no longer intermittently prints an Expected DataContext to already have been set via setCtx error to the logs. Addresses #30670.

    15.18.0
  • Cypress now shows a clear error explaining that browsers must be an array and that a specific browser should be selected with --browser when a CYPRESS_BROWSERS environment variable is set to a plain string (for example CYPRESS_BROWSERS=chrome) instead of showing an opaque TypeError: a.map is not a function error. Addresses #33198.

    15.18.0
  • Upgraded webdriver from 9.14.0 to 9.28.0, geckodriver from 5.0.0 to 6.1.0, and edgedriver from 6.1.1 to 6.3.0. These packages are used to launch and automate Firefox during cypress run and cypress open. Addresses #34072.

    15.18.0
  • The Command Log no longer becomes progressively unresponsive when moving the mouse in and out of a test's command list during long tests. Hovering over the command area previously triggered a style recalculation across the entire list of commands, causing a delay that grew with the number of commands logged. Fixes #33179.

    15.17.0
  • Cypress.expose() values can now be overridden per suite or test via test config overrides (for example, describe(), context(), it(), or test()) using { expose: { key: value } }. Suite- and test-level overrides are merged, with test-level keys taking precedence; override keys are applied at test start and restored after each test without affecting unrelated values set in hooks. Addresses #33356. Addressed in #33925.

    15.17.0
  • When signing up to Cypress Cloud from the Cypress desktop app, if a project is auto-provisioned during signup, Cypress now automatically writes the projectId to the cypress.config file. If the file cannot be written, a modal is shown with the project ID as a copyable snippet and a link to open the config file directly in your IDE. Addressed in #33976.

    15.17.0
  • Improved CI environment detection and commit metadata capture for Cypress Cloud recorded runs within Argo CD and Argo Workflows. Addressed in #33932.

    15.17.0
  • Video recording no longer silently fails on Firefox 93+, where it previously produced no video and ended with a We failed processing this video or operation timed out warning. Fixes #18415. Fixed in #33960.

    15.17.0

2 internal lines (docs, tests, tooling) left out.

A whole project to check? Paste its package.json in the dependency check: every deprecated, outdated or vulnerable dependency, with what to upgrade to. Free, no account.